Super Glass Barrier

Antistatic Super-Hydrophilic Self-cleaning coating for Exterior materials.

This solution is methanol based coating. It needs to pay Extra shipping costs and customs. It has a possibility to take  2~3 months to delivery depending on the area or country.

This solution is methanol based coating. It needs to pay Extra shipping costs and customs. It has a possibility to take 2~3 months to delivery depending on the area or country.

¥200,000

  • It's up to location and means of shipping
Download
Down load of Catalog A3
Super Glass Barrier.pdf
Adobe Acrobat Document 847.0 KB

◆Product Guidance movie

◆Product study movie


Antistatic Super-Hydrophilic Self-cleaning coating for Exterior materials 

-Exterior material paint. Organic painted surface

(Application test is required for painted substrate by Fluorine-based coating )

-Aluminum panel   -Tile

-Commercial vehicle body surface

-Concrete, stone, brick

  (Seal Coat is required before the application)

-The building in general and office buildings, condominiums, hotels,

Commercial ,government, hospitals, welfare and school facilities

-Public facilities such as stations, airports, shops

-Road materials in general, guardrail, noise barriers, road signs

-Civil engineering ... bridges, tunnels, dams

-Vehicle ..... railway, bus, truck, working vehicle


-100% Inorganic material, Methanol-based,

-Colorless and transparent

-Silica, tin oxide, methanol

-Super UV irradiation test: passed 300 hours test.

-Xenon weather meter weathering test

: passed 1391 hours test.


Download
Download of A4 reference
Antifouling Case studies 2015.pdf
Adobe Acrobat Document 4.3 MB

Ultrafine particles of tin oxide (SnO2) has many free electrons, and the electrical resistance is low, (surface resistance ~ 109Ω / □). It's prevent to adsorb and adhere of the fine dust and particles floating in the air. Also it works for the inorganic dirt such as exhaust gas and coal ash, and yellow sand or iron powder which cannot be decomposed with photo catalyst.

Creating an even on the surface of the glass by using 100 to 200 Nano-sized silica, unlike the super-hydrophilic effect of the photo catalyst, it can make a constantly super-hydrophilic film without the irradiation of light. Contact angle is 5 degrees or less , so the rain or water enters the bottom of the dirt and it washes away the dirt.

Water makes ultra-thin film on the substrate, it is called a super-hydrophilic film.

Super-hydrophilic film technology by inorganic binder

The surface of the substrate looks flat, but there are fine unevenness invisible when it is expanded. To control a variety of particle size (2nm ~ 10nm) of the silica and tin oxide by SKETCH binder technology and it enables adhesion to any material. Also, because it is using a very small particle size of the silica, the photo catalyst and antistatic agent comes out to the surface, it will be able to add a very efficiently function.

Fractal theory

 Effect of the hydrophilic can be improved by fine unevenness of the surface. Unevenness lines uniform becomes a super water-repellent status; on the other hand, it lines unevenly becomes super-hydrophilic status

Preparation Tools

-The substrate such as an aluminum panel (Size: 15cmx15cm)

-Super Glass Barrier

-Micro-fiber cloth (If not, please prepare a clean cloth.)

-Water spray bottle   -Baby powder

-The surface resistance meter (please purchase by Internet)

Application

1) Decide coated and non-coated area and wash with water both to clean.

 2) Fold micro-fiber cloth to small and apply small amount of coating.

 

 3) Apply by hand only the coated surface on the vertical and dry.

 (Dries within 5 minutes at room temperature. quick-dry type.)

Verification

1)The coated surface and non-coated surface are measured by the surface resistance meter. Number of coated area will be two to three squares higher than non-coated. = Confirmation of the antistatic effect
2)Sprinkle to baby powder to coated and non-coated area.
3)When you shake the powdered substrate, the adhesion of baby powder reduces on coated area. =Confirmation of the antistatic effect.

 

4)The coated surface becomes super hydrophilic film when you spray water and wash baby powder. =Confirmation of the super hydrophilic effect.

Note for the application

1)If the substrate has become white when coated, determine the amount of coating was large.
2)It will take more than 12 hours to fully cure. When you spray water to confirmed immediately after the application,

       please apply again.

3)No rain or snow when you apply outdoor.
4)If the surface temperature of the substrate is not less than 30 degrees, liquid will volatilize before forming. Apply to cool substrate.

 

5)Depending on the resin base material, it may not be applied.

◆Applying with spray gun  

◆How to apply with spray gun Part2


Download
Application Manual(SELF) 2014 - EN.pdf
Adobe Acrobat Document 862.1 KB

Application for wall,tile,etc.

・Spray Gun・Cup・Regulator

・Cap ✖each of 1pcs

40,000JPY

This device can verify how much conductivity is.We can see anti-static performance.

10,000JPY